Only posts tagged with release are shown.

New release: Driver Fusion 5.1

We're thrilled to announce the release of Driver Fusion 5.1. In this release, we've worked on a lot of varied areas, making your experience with Driver Fusion better. Please send your comments and suggestions to us, we like to read them. We hope you enjoy Driver Fusion 5.1!

Localization

To provide a localized experience for everyone around the world, we've greatly improved the quality of the supported languages. Our translators have been hard at work to make sure that the majority is now correctly translated. If you are keen on having Driver Fusion translated into your own language, or if you want to improve it, please contact us.

Steam account

Driver Fusion now integrates seamlessly with Steam and uses their authentication system to sign you in. This will significantly reduce the number of steps that are required to get started, as you no longer have to activate it with a third party key. All third party keys that have been given out by Steam will be revoked once we are sure that everyone received the update through Steam.

Driver cleaner

We've always relied on predefined processes and services, that need to be stopped, in order to clean driver entries that are still in use. This works great, until you have something installed that isn't on this list. Driver cleaner is now able to detect which processes and services are using an entry and will automatically stop them before the entry gets cleaned. The stopped processes and services will be restarted once the entry has been cleaned.

.NET Framework and operating systems support

Starting with this release, you need to have at least .NET Framework 4.5.2 installed. Almost everyone will have it installed through Windows Update or otherwise, but if not, then our installer can automatically download and install it for you. This is also the first version that no longer supports Windows XP and Windows Vista. You can continue to use Driver Fusion 5.0 if you rely on these operating systems. The content service behind Driver Fusion will continue to work with it for the foreseeable future.

What else?

We've added support for more devices - along with additional information - in device monitor. The issues you've reported have been fixed and the start up time has been reduced. Furthermore, you can now easily invite a friend to Driver Fusion.

New release: Driver Fusion 5.0.2

We’re pleased to present Driver Fusion 5.0! It’s been a while, but we’ve been working hard on bringing you this update. Our mission was to improve the performance, stability, usability and the offered features. You can read the highlights of these improvements below. We hope you like this version as much as we do!

Interface and usability

We’ve been focusing our efforts on improving the interface and it’s usability and have redesigned almost everything. It’s still familiar to previous versions, so you won’t have to learn from scratch. An important highlight, by popular request, is that you can now search, filter and sort through content, almost everywhere! But that’s not all, it’s also possible to use Driver Fusion 5.0 with just your keyboard. We’ve added focus hints to all controls to make it easy to see where the current focus is. You’ll see how nifty all these changes are once you start using them.

Health check

Up until now, there were two categories for downloading drivers; missing drivers and outdated drivers. As they did almost the same work, they have been combined into driver update. If you’re checking for driver updates, clarity is essential. We’ve been receiving a lot of feedback on why Driver Fusion is recommending certain drivers. Whenever a recommended driver is not undeniably clear, it will now add an explanation. Still having doubts? Feel free to contact us and we’ll help you out. At times you want to take a closer look at a device or its driver. You can now go directly to the device or its driver in device control. Another frequently requested feature we’ve added is that each recommended issue can now be fixed on its own. Don’t worry, you can still fix all issues at once.

Device control

Starting with Windows Vista, there’s additional information available about a device or a driver. This information was already used throughout Driver Fusion and has now been added to device control. All available information – including the identifier – is now accessible immediately after selecting a device. Driver Fusion 5.0 also ships with several other important improvements to device control. If you want to install a driver it now includes compatible drivers from Windows’ driver store. For experts, we’ve also added the ability to uninstall a driver from Windows’ driver store. The driver signature verification is also significantly improved, both the results and the performance (on average a driver is now verified twice as fast).

Device monitor

If you want to monitor your devices, Driver Fusion has always given you a variety of options to do so. The current sensor values are great for getting insight into your devices, but sometimes you want to visualize past performance as well. In Driver Fusion 5.0, we’ve added a graph – for each device – for the available sensor values. It’s super flexible, and will allow you to add just the sensors you want to display. We’ve also added additional information about each device, such as the socket of your processor, the BIOS version of your motherboard, and the reallocated sector count of your hard disks.

Driver cleaner

Need to clean up old drivers or install a new driver? All drivers received new entries to be up-to-date with their latest versions. We’ve also added support to clean the device itself and entries from the task scheduler and Windows’ driver store. Several new drivers have also been added, including NVIDIA’s GeForce Experience software. In Driver Fusion 5.0 we separated entries that are shared between certain drivers. While cleaning those drivers – such as NVIDIA’s display driver and NVIDIA’s GeForce Experience – you can now decide whether you want to include their shared entries. We’ve also added a hint when drivers are combined by the manufacturer to support multiple devices, such as Logitech’s keyboard and mouse drivers.

History

Sometimes you want to view or restore an operation you’ve performed in Driver Fusion. Our goal for Driver Fusion 5.0 was to create an easy to use – and complete – history of almost anything you can do. Whether you clean a driver or disable a device, you don’t have to worry anymore about the outcome as you can always undo the operation. In most cases, you want to restore the entire operation. Operations that are merely collection of other operations, such cleaning a driver, can also be restored separately. We’ve also visualized if the operations you performed succeeded.

In driver cleaner: some installers cannot be restored because they are missing on your computer. This is not a limitation of Driver Fusion but due to how Windows or these installers are set-up. You can manually download the installer again.

Settings and data

It’s good to have choices, like the ability to change the default preferences of Driver Fusion. In Driver Fusion 5.0 we’ve changed a few default preferences to their expected value. We’ve also combined several settings and – where applicable – extended their functionality throughout the entire application. A diagnostics report for troubleshooting can now be created from the general settings.

To benefit from Windows’ file protection, Driver Fusion will now store its data in different folders. Data that can be shared among all users, such as driver backups, is written to the ProgramData folder. User-specific data, such as your settings, is written to the local AppData folder. This change also enables you to use Driver Fusion in multi-user environments without having to share your settings with everyone. If you want to override this behavior and have Driver Fusion store its data in the installation folder, you have to start Driver Fusion using the --p argument. This does not apply to the Steam edition, data will continue to be stored in the steamapps\common folder in order to utilize Steam Cloud.

Operating systems support

Driver Fusion 5.0 will be the last update for Windows XP and Windows Vista. Microsoft itself ended support for Windows XP in 2014 and Windows Vista in the beginning of 2017. Unsupported operating systems receive no security updates, have known exploits, and can be dangerous to use. You can continue to use this version of Driver Fusion if you rely on these operating systems. The content service behind Driver Fusion will continue to work for the foreseeable future. We have disabled automatic updates on these operating systems. You do not need to do anything else.

5.0.1 and 5.0.2

These releases fix some minor issues and change the installer's compression to resolve the installer's false positive detection by certain antivirus software, such as Avast and AVG.

You play an important role in making Driver Fusion better. We welcome your feedback on this version, as well as any ideas you might have. Please contact us on our website.

New release: Driver Fusion 3.3

We are pleased to announce that Driver Fusion 3.3 can now be downloaded. In this update we focused on improving the usability and performance of health check. More information can be found below.

New features:

  • Health check - Community suggested feature - The driver backup destination can now be changed before scanning.
  • Health check - Community suggested feature - The severity of outdated drivers has been redesigned to make it more clear.
  • Localization - Improved the Italian translation with special thanks to Massimo Castiglia.

Changed features:

  • Health check - Improved the responsiveness of the interface.
  • Health check - Improved the severity calculation for outdated drivers.
  • Health check - Driver backup will no longer list all existing driver backups. This is now identical to missing drivers and outdated drivers.

Resolved issues:

  • [Premium] Device control - The online driver install dialog could occasionally cause Driver Fusion to close unintentionally.
  • Health check - Driver backup could in some cases suggest to backup the same driver again.
  • Driver family - The installed driver families option could occasionally not be remembered.
  • Interface - The menu would not show tooltips when a right-to-left language is used.
  • Settings - Changing how Windows driver updates are installed could in some cases be ignored.
  • Settings - The incorrect positioning of confirmation notifications.
  • Settings - Changing the language could occasionally cause Driver Fusion to close unintentionally.

For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 3.2

Today, we are happy to announce that Driver Fusion 3.2 is now available for download. This release marks the beginning of improving driver family. More information can be found below.

New features:

  • Driver family - Community suggested feature - Added a lot of new driver family entries for AMD graphic cards, NVIDIA graphic cards and NVIDIA PhysX. Driver Fusion is now again able to detect and delete everything of importance that is installed by their installers.

Changed features:

  • [Premium] Device control - Improved the results and performance of retrieving device and driver properties.
  • Driver family - Improved the reliability and performance of searching and deleting driver family entries.

Resolved issues:

  • [Premium] Device control & health check - A backup of a driver with a WHQL signature could occasionally show an unverified driver message during installation due to files being included that did not belong to the driver.
  • [Premium] Device control & health check - A backup of a driver that linked to another driver could in some cases not include all necessary files.
  • [Premium] Device control - A couple of device and driver properties were never listed.
  • [Premium] Device control - Retrieving device and driver properties could occasionally cause Driver Fusion to freeze or close unintentionally.
  • [Premium] Device control - Messages could in some cases be shown with incorrect punctuation.

For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 3.1

We are thrilled to announce Driver Fusion 3.1, which can be downloaded right now. This update comes with full support for the recently released Windows 10. More information can be found below.

New features:

  • Windows - Driver Fusion is now fully compatible with Windows 10.
  • Localization - Added 5 new languages: Filipino (Philippines), Irish (Ireland), Sesotho sa Leboa (South Africa), Sinhalese (Sri Lanka), and Tajiki (Afghanistan and Tajikistan).
  • Driver family - Community suggested feature - Added a driver family for Rivet Networking, the company behind products such as the Killer E2200 and Killer E2400.
  • Driver family - Community suggested feature - The installed driver families option is now remembered. If you cancel while the installed driver families are loading, it will revert to all driver families.

Changed features:

  • [Premium] Device control & health check - Improved finding drivers, which increases the number of (outdated) drivers found on most systems.
  • [Premium] Device control - Improved the results and performance of device identifier.
  • [Premium] Monitor - Community suggested feature - Added support for the ITE IT8620E.
  • Interface - Community suggested feature - Most controls will now regain focus after it has been lost due to loading content.
  • Installer - The installer is now free from third party advertisements. You can read more about it here.

Resolved issues:

  • [Premium] Device control - Copying device or driver information to the clipboard could occasionally cause Driver Fusion to freeze or close unintentionally.
  • [Premium] Device control - Device overview could in some cases show unreadable device information.
  • [Premium] Device control - Unknown devices could in some cases be hidden from the user.
  • Health check - Outdated drivers could occasionally find the driver that was already installed.
  • Driver family - Deleting driver family entries could in some cases get stuck at 0%.
  • Interface - The verification dialog screen could occasionally focus on the wrong control.
  • Interface - The escape key did not always close the dialog screen.
  • Interface - The tab key could occasionally focus on controls behind the dialog screen.

For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 3.0

We are delighted to announce that Driver Fusion 3.0 is available for download now. The most important change of this update is a redesigned menu based on the feedback we received. More information can be found below.

New features:

  • Interface - Community suggested feature - The menu has been redesigned to improve usability. It is now possible to go directly to each screen without having to select another tab first.
  • Interface - Added a help button to go directly to the manual.

Changed features:

  • [Premium] Device control - Added a progress indicator while scanning for hardware devices.
  • Driver family - Improved caching of installed driver families.
  • Driver family - The installed driver families will now automatically refresh after a delete operation.
  • Driver family - Added a progress indicator while scanning for installed driver families.
  • Driver family - History items are now saved even after cancelling the current operation.
  • Interface - Improved the responsiveness of driver family.
  • Interface - Improved font scaling of the notification bar.
  • Interface - The scrollbar is no longer invisible when it is disabled.
  • Interface - Many icon changes to clarify their function.
  • Localization - Community suggested feature - Added right-to-left language support.
  • Localization - Added Kazakh and Uzbek.

Resolved issues:

  • [Premium] Device control - Devices without compatible ids could occasionally cause Driver Fusion to freeze or close unintentionally.
  • [Premium] Device control - Changing between different sources in the driver backup install dialog could occasionally result in an empty title bar.
  • Desktop - The user name was not stored correctly for all languages.
  • Interface - A white line was occasionally rendered at the bottom of the window.
  • Steam - The Tree Mulcher Steam achievement could occasionally cause Driver Fusion to close unintentionally.
  • Filters - The new filter entry could also be added with cancel.
  • Filters - Multiple filters with the same name could be added.
  • Filters - Add new filter entry button could in some cases be visible without a selected filter.
  • Driver family - Scanning for installed driver family entries could in some cases get stuck at 0%.

Since last year we've been working a lot on improving the interface of Driver Fusion. Many parts of the interface, including the redesigned menu added in this update, are improved based on the suggestions we receive. Please continue to share your thoughts with us as this is important for us and the future of Driver Fusion. As with all updates, it's free for everyone to enjoy.

For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 2.9

We are pleased to announce Driver Fusion 2.9, which is now available for download. In this update we have resolved several issues with the help from our amazing community. You can find a detailed list of the changes below.

Changed features:

  • Interface - Improved the responsiveness of history, desktop and filters.

Resolved issues:

  • [Premium] Device control & health check - Downloading drivers could in some cases get stuck at 0%.
    [Premium] Device control - Changing the filters in the driver backup install dialog did not work.
  • Steam - The Tree Mulcher Steam achievement could occasionally cause Driver Fusion to close unintentionally.


Thank you all for your continued support!
For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 2.8

We're very excited to announce the release of Driver Fusion 2.8, now available for download. This releases introduces many community suggested features, along with several other changes that you will find below.

New features:

  • [Premium] Device control & health check - Community suggested feature - The destinations for driver backups are now entirely shared. You can add new or delete existing destinations through the settings.
  • [Premium] Update - Community suggested feature - Added a progress indicator while updating Driver Fusion to a new version.
  • Interface - Community suggested feature - The dialog screens and menu are redesigned to improve usability.
  • Settings - Community suggested feature - The settings have been completely redesigned and reorganized with a focus on the ease of use. As a result, several settings have been changed or combined with other settings. Along with these improvements, the settings are now stored in another format that is less prone to error.

Changed features:

  • [Premium] Monitor - Community suggested feature - Improved the detection of the latest Intel CPUs.
  • [Premium] Device control - Community suggested feature - Install a driver now includes driver backups from all destinations.
  • [Premium] Device control - Improved the detection of corrupt driver backups.
  • Windows - Improved the compatibility with Windows 10.
  • Connectivity - Improved the detection of internet access.
  • Interface - Increased the width of the edges of the window to make it easier to resize.
  • Interface - Improved the performance, most noticeable on low-end machines.
  • Interface - On Windows XP, decreased the font size to match the font size of Windows Vista and higher.
  • Interface - The window location is now remembered per screen resolution.
  • Interface - Improved the positioning of menu buttons on small window sizes.

Resolved issues:

  • Starting/closing - Opening another instance of Driver Fusion could occasionally cause Driver Fusion to close unintentionally.
  • Desktop - Resolution and monitor information was not stored correctly.
  • Interface - On Windows XP, maximize would only maximize to one half of the screen.
  • Steam - Two Steam achievements could in some cases not unlock.


Anything else you would like to see added or improved? Let us know!
For all Driver Fusion Premium users, your installation will update automatically.

New release: Driver Fusion 2.7

Driver Fusion 2.7 has been released and is available for download. This release focuses on the new online service. Below you will find information regarding the old online service and the other changes.

New features:

  • [Premium] Health check - Community suggested feature - Added a progress indicator to visualize the device that is currently being fixed.

Changed features:

  • [Premium] Health check - Improved the ordering of missing and outdated drivers.
  • Desktop - Improved the performance of restoring the desktop icons.
  • Settings - The settings are now automatically saved after every change instead of only on close.
  • Service - The online service that allows you to gain access to several features, such as the automatic driver updated, has been completely rewritten. This new online service enables us to deploy new versions more easily without disrupting the service and is also more friendly to firewalls. The old online service will remain fully functional until February 1st, 2015. After this date only signing in with your email address and updating will remain functional for the old online service. As of Driver Fusion 2.7 the new online service will be used.

Resolved issues:

  • [Premium] Device control - Identify could in some cases not show any results.
  • [Premium] Device control - Reselecting a device could occasionally cause Driver Fusion to freeze or close unintentionally.
  • [Premium] Device control - The backed up driver text did not update after selecting another destination.
  • [Premium] Device control - Changing the sort order of online drivers could in some cases cause Driver Fusion to freeze or close unintentionally.
  • Desktop - Desktop icons could in some cases not restore to the correct location.


For all Driver Fusion Premium users, your installation will update automatically!

Everyone at Treexy would like to wish you a Merry Christmas and a Happy New Year. As this year is ending, we would also like to thank you for your continued support. We will be back with more releases and news on our latest projects in 2015.

New release: Driver Fusion 2.6

Driver Fusion 2.6 has been released and is available for download. This release focuses on improving the user experience. Below you will find the release notes containing all the changes.

New features:

  • [Premium] Device control & health check - Added diagnostic logging to provide easier troubleshooting. The log files are automatically stored in the log folder in the installation folder.

Changed features:

  • [Premium] Device control - Moved uninstall from driver overview to device overview.
  • [Premium] Device control - Added a small delay before searching for a device to improve performance on low-end machines.
  • [Premium] Device control - Identifying devices and downloading drivers can now be cancelled.
  • [Premium] Health check - It is now possible to scroll through the health categories during fixing.
  • [Premium] Health check - Exclude is now hidden during and after fixing.
  • [Premium] Health check - Improved the progress indication of downloading drivers by showing the progress per file instead of per driver.
  • [Premium] Health check - Identical drivers are no longer downloaded multiple times for different devices.
  • [Premium] Monitor - Support has been added for the latest Intel processors.
  • Interface - Improved sorting performance in data grids.
  • Interface - Many changes to improve perceived performance.
  • Interface - Added auto focus to all dialog screens.

Resolved issues:

  • [Premium] Device control - Device enable or disable showed an incorrect failed message.
  • [Premium] Device control - Confirmation warnings no longer have a delay after choosing the action.
  • [Premium] Device control - Uninstall could in some cases be hidden, especially with devices without drivers.
  • Health check - Adding an outdated drivers could occasionally cause Driver Fusion to freeze for a moment.
  • Health check - Outdated drivers could in some cases never detect any drivers, with special thanks to Jorn for testing.
  • Localization - Chinese (Simplified) was not automatically detected.
  • Interface - The border could occasionally not show around the window when it was not focused.


For all Driver Fusion Premium users, your installation will update automatically!

Loading more posts...
Language English Contact Terms and Conditions Sitemap
© 2012-2017 Treexy.com All Rights Reserved.