News

We're delighted to announce the release of Omnify Hotspot 2.2. This release contains several improvements based on your feedback. Please send your comments and suggestions to us, we like to read and use them!

Block advertisements

You can now block those annoying and unwanted advertisements per device. Previously, blocking advertisements was applied to each device.

.NET Core

Starting with this release, you need to have at least .NET Core 3.1 installed. .NET Framework has received its last major version and .NET Core is the future of .NET. If you don't have it installed then our installer can automatically install it for you.

What else?

The network driver has been updated and the issues that you've reported have all been fixed.

We're thrilled to announce the release of Driver Fusion 8.1 today. This update contains several new features and other improvements. Please continue to send your comments and suggestions to us, we like to read and use them!

Health check

You can now use health check to delete third-party drivers from the Windows driver store that are no longer used. The number of these drivers continues to grow with each driver update, and deleting them can free up a significant amount of disk space. Furthermore, the time required to check for driver updates has been reduced and installed drivers are now automatically backed up.

Performance

The start-up time has been considerably reduced, along with many other optimizations such as reducing the time it takes to switch between features.

Device monitor

We've added and improved support for various devices, such as additional sensors for AMD and NVIDIA graphic cards and support for Intel Comet Lake processors. The time required to load the sensors from your installed devices has also been reduced.

Driver download

Downloading drivers is now significantly faster by using multiple threads to download the files. This applies to both health check and device control.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions.

What else?

The issues that you've reported have all been fixed.

We're excited to announce the release of Omnify Hotspot 2.1. This release contains several reliability improvements. Please send your comments and suggestions to us, we like to read and use them!

Refer a friend

Refer friends and family to Omnify Hotspot and give them an extra month of Omnify Hotspot Premium for free! We'll also reward you with a free month for every referred user who purchases a license. See our terms for more information.

What else?

The network driver has been updated and the issues that you've reported have all been fixed.

We are delighted to announce the release of the Driver Fusion 8.0 today. With this release, we've made several quality and performance improvements. Please send your comments and suggestions to us, we like to read and use them!

Device monitor

The time required to load the sensors from your installed devices has been considerably reduced. Furthermore, the graphs are now rendered with DirectX if available. Hardware rendering offers great performance improvements, especially for systems that are limited by the CPU. We've also added and improved support for several devices, such as adding CCD temperatures for AMD Ryzen™ 3000 Series processors.

Refer a friend

Refer friends and family to Driver Fusion and give them an extra month of Driver Fusion Premium for free! We'll also reward you with a free month for every referred user who purchases a license. See our terms for more information.

Health check

The time required to check for driver updates has been significantly reduced.

Device control

Device and driver information is now fully loaded in the background. A loading indicator is displayed to indicate that information is still being loaded. In addition, the time needed to load devices has been further reduced.

Device identifier

The results of determining the type, name and manufacturer of a device have been improved.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions.

What else?

The issues that you've reported have all been fixed.

We are pleased to announce the release of the Omnify Hotspot 2.0. This new release adds the ability to change between profiles and also improves various areas based on your feedback. Please send your comments and suggestions to us, we like to read and use them!

Profiles

Easily create a new profile in Wi-Fi hotspot and repeater with its own settings and connected devices. Whether you are at home, on a business trip, or visiting friends, you can switch between them at any time without the need to remember their names and passwords. You can also use it to create a guest network in seconds.

Firewall

Within Wi-Fi hotspot and repeater, the internet and network access settings will no longer force the changes on existing devices. You'll need to press Ctrl to override the settings for existing devices. Furthermore, you can now whitelist or blacklist a URL for the advertisement blocker by creating a domains_whitelist and domains_blacklist file in the installation directory and adding the URL on a new line.

Wi-Fi hotspot and repeater starting time

Restarting a hotspot or repeater is no longer waited for if there are no devices connected.

Performance

You should see a significantly reduced latency and CPU usage thanks to a lot of optimizations.

What else?

Windows 7 compatibility has been improved and the issues that you've reported have all been fixed.

We're excited to announce the release of Driver Fusion 7.2. This update contains several quality and reliability improvements. Please try out these improvements share your feedback with us, we like to read and use them!

Health check

The time required to check for driver updates has been reduced.

Device monitor

We've added and improved support for several devices, including NVMe drives and AMD Ryzen™ 3000 Series processors. Furthermore, two additional grid lines have been added to the x-axis of the graphs to make it easier to determine the time in between.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions. We've also improved the additional procedures that help to ensure that the remaining registry entries can be cleaned.

What else?

The minimum signature of suggested drivers can no longer be changed to none. The issues that you've reported have all been fixed.

We are thrilled to announce the release of the Omnify Hotspot 1.1 today. With this release, we've improved various areas based on your feedback. Please send your comments and suggestions to us, we like to read and use them!

Performance

You should see an improved network throughput performance and reduced latency and CPU usage thanks to a lot of additional optimizations.

DHCP server

Omnify Hotspot is now using its own built-in DHCP server instead of using Windows to give out IP addresses. This allows greater control over the assigned IP addresses to ensure that devices keep the same IP address after a reconnect.

Wi-Fi hotspot and repeater starting time

The used network adapters are now remembered to greatly speed up starting a hotspot or repeater after the application starts. In our testing, starting a hotspot or repeater is now typically done within 5 seconds, whereas it could previously take as much as 30 seconds. It's still necessary to detect the correct network adapters after you've changed a network adapter.

What else?

We've added a warning when you're connected to a 5 GHz Wi-Fi network and the issues that you've reported have all been fixed.

Today, we're thrilled to announce the release of Driver Fusion 7.1. This update contains several quality and reliability improvements. Please try out these improvements share your feedback with us, we like to read and use them!

Responsiveness

In the previous update we've mentioned that switching between features can take some time to render if there's a lot of content loaded, such as the results from driver cleaner. In this update, we've greatly reduced the time and memory usage required to switch between the features. Furthermore, loading driver entries is now completed in almost half of the original time for large drivers.

History

Viewing the details of an operation now includes a summary on top to make it easier for you to see and remember what you've selected.

Device monitor

The graphs' axis from top to bottom will no longer always start at zero to make it easier to see small differences. The labels are also more compact to make it possible to draw slightly larger graphs.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions.

What else?

The issues that you've reported have all been fixed.

We're pleased to announce the release of Driver Fusion 7.0. With this release, we've made it possible to switch between features without having to start over. Please send your comments and suggestions to us, we like to read and use them!

Usability

Driver Fusion will now remember the state of your opened features. For example, you no longer have to recheck for issues in health check after you've switched to device control and can immediately return to the results you were looking at. Switching between features can take some time to render if there's a lot of content loaded, such as the results from driver cleaner.

Scheduler

The scheduler will no longer show a fixed popup at the bottom right corner but instead use an automatically closing Windows notification. On Windows 10, this notification will not be shown if you've enabled Focus Assist. Futhermore, you can change in the settings which issues you want the scheduler to check for.

Health check

You can uncheck any of the three issue categories again before you're checking for issues.

Device control

The time required to load devices is greatly reduced and is now completed within a second on most systems. Other features that use devices, such as health check and driver cleaner, also benefit from this change.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions. Searching for entries also take less time, which is especially noticeable for drivers with many possible entries. In addition, we've added support for cleaning UWP apps on Windows 10.

Driver backup

We've improved support for backing up Universal Windows drivers, which enable developers to create a single driver package that runs across multiple different device types, from embedded systems to tablets and desktop PCs.

High-DPI scaling improvements

Support for per-monitor scaling has been added and we've increased the rendered resolution of most icons.

.NET Framework

Starting with this release, you need to have at least .NET Framework 4.7.2 installed. Almost everyone will have it installed through Windows Update or otherwise, but if not, then our installer can automatically download and install it for you.

What else?

We've added support for more devices in device monitor and the issues that you've reported have all been fixed.

We're excited to announce the release of Driver Fusion 6.2. With this release, we've improved various areas based on your feedback. Please send your comments and suggestions to us, we like to read and use them!

Usability

Driver Fusion will now remember and reopen your last used feature. We've also added a description to the toggle switches to make their state clearer.
Furthermore, you'll now immediately receive visual feedback when you enter invalid data in the account and activation dialogs.

Steam

The follow us button is now always visible to make it easier for you to unlock the corresponding Steam achievement.

Localization

The number of officially supported interface languages has been slightly reduced. Driver Fusion will continue to detect the files located in the languages folder, so you can still add your own translations.

Treexy & Steam account

If you sign in, or out, Driver Fusion no longer reloads the current feature and automatically updates the content instead.

Performance

The start-up time has been reduced and the overall responsiveness has improved.

Scheduler

The scheduler can now be added to, and executed on, multiple Windows user accounts.

Driver cleaner

The cleanable drivers received new entries to be up-to-date with their latest versions.

What else?

The issues that you've reported have all been fixed.